Post by iconPost by Slapdash | 2017-11-23 | 15:21:26

Sorry for the silly question....

Can someone tell me the difference between the two polars... VOR and VOR (Testing)?
or direct me to the relevant post....

It must be the lack of sleep.... I can't find it in my trawling..

Thanks

commenticon 7 Comments
Post by iconPost by toxcct | 2017-11-23 | 15:41:12
Look in the right click menu...
The list of options available are not the same.
Basically, the 'testing' version is more recent and about to become the main stream.
Post by iconPost by zezo | 2017-11-23 | 16:29:15
The only difference should be separate sail selection. As long as you are Full Pack or No Sails they should give exactly the same results (with or without foils)
Post by iconPost by Slapdash | 2017-11-23 | 16:51:22
Thank you, but with everything selected...

That is Pro Sails and Foils in VOR and everything (LS C0 HS and Foils) in VOR (Testing) I am seeing differences....

14Kts 105 deg VOR: 16.87 VOR (testing) 16.67
12Kts 090 deg VOR: 14.47 VOR (testing) 14.41

very slight.... I know, but there for me...

Thanks anyway... will watch the Dashboard... and see!
Post by iconPost by zezo | 2017-11-23 | 18:47:51
The router output should be identical. That means that no new errors are added in the beta ;-)

I'll check the polar chart - it may have some things unfinished like foils and hull polish
Post by iconPost by Devaneio | 2017-11-26 | 01:12:35
Hi Cvetan,

There are some little differences in the polars of VOR and VOR (Testing), in the merge area below 16 kts and above 10 kts (foils influence).

TWS 14 kts TWA 110 - VOR speed 17.16 kts
- VOR (testing) speed 16.96 kts

Thank you so much for the excellent work you are doing.

Fernando
Post by iconPost by zezo | 2017-11-26 | 10:15:13
The linear interpolation is buggy due to copy-pasting.

cv = (ws - 11) / 10;

Should actually read / 5 because the twsMerge range is 5, not 10 like the twaMerge range.

I's been noted and fixed a long time ago, but not everywhere. And I'm going to retire that beta soon anyway.

The router uses different formula so it's correct.
Post by iconPost by Devaneio | 2017-11-26 | 18:15:38
Ok Cvetan,

Thank you again for your excellent work and support.

Best Regards,

Fernando

border
Topics list
Posts
border
1
border
border
5
border
border
Copyright 2009 by ZEZO.ORG. All Rights Reserved.