Post by iconPost by Benoit | 2018-12-20 | 09:07:15

Hy
For the Sydney-Hobart, the parameter Foils is :
foil:{"speedRatio":1.04
twaMin:80
twaMax:160
twaMerge:10
twsMin:16
twsMax:35
twsMerge:5}

The speed parameter Foils is :
twsMin:16 & twsMax:35
But in the table “Route Rezo”, cells paint in black do not correspond has these speeds (column TWS)

And that mean the parameters twaMerge and twsMerge?


commenticon 4 Comments
Post by iconPost by zezo | 2018-12-20 | 09:31:44
The foils don't kick in at once. They start working gradually 5 degrees/knots outside the min/max - that's the Merge parameter.

That's why you see foils at 12.x knots. It's a linear interpolation, so at 12.5 knots you only have a ratio of 0.004, 0.02 at 14.5 and so on.
Post by iconPost by Benoit | 2018-12-20 | 10:49:22
Ok, thank's
et vive les mathématique !
Post by iconPost by GeGaX | 2018-12-20 | 18:23:39
The foils are active from TWS 11.1 to 39.9 kts with TWA from 71 to 169 °.

If the cells are dark on route zezo.org, they only show that the use of foils is possible.
Post by iconPost by toxcct | 2018-12-20 | 19:42:53
Sinon, tout cela est illustré et visible graphiquement sur mon application de visualisation des polaires :

http://toxcct.free.fr/polars/

1) choisissez la bonne course
2) sélectionnez les options et les voiles avec lesquelles vous avez équipé votre bateau
3) cochez la case "Display foils activation range" à droite de la coche des foils.
4) jouez avec la vitesse du vent (TWS) pour voir l'arc orangé varier. Plus il est foncé et plus les foils sont performants...
border
Topics list
Posts
border
5
border
border
Copyright 2009 by ZEZO.ORG. All Rights Reserved.